Rev E design valuesTPS-200, three-quarter view. Design rendering, Rev E design values. Not a photograph.
Pull
200 short tons (400,000 lb; 1,779 kN) at 3,537 psi on a 4,000 psi power unit
Rev E design values
Stroke
48 in; fast mode to 139 short tons
Rev E design values
Clearance
12.25 in (passes a 9-5/8 coupling)
Rev E design values
Full specification
Model
TPS-200
Design pull (lb)
400,000
Pull (short tons)
200
Revision
Rev E design values
Pull
200 short tons (400,000 lb; 1,779 kN) at 3,537 psi on a 4,000 psi power unit
Parts designed for
Parts designed for 5,000 psi; relief set at 200 short tons
Proof test
250 short tons (1.25 times the design pull), each unit
Stroke
48 in; fast mode to 139 short tons
Stroke speed
About 53 in/min; about 76 in/min fast
Clearance
12.25 in (passes a 9-5/8 coupling)
Height, lowered / raised
74 / 122 in (jack only)
Wellhead spool options
13-5/8 3M standard, cellar bridge
Spool height
15.5 in
Base / head width
44 / 41 in
Weight
About 6,500 lb jack; about 1,300 lb spool
Master bowls
9-5/8 in
Insert bowls
7-5/8 in
7 in
5-1/2 in
5 in
4-1/2 in
2-7/8 in
2-3/8 in
Slip sizes
9-5/8 in
7-5/8 in
7 in
5-1/2 in
5 in
4-1/2 in
2-7/8 in
2-3/8 in
Bowl
adapter bowl
Power unit
4,000 psi, about 26 gpm, 85 to 100 hp, air shutoff
Load holding
Counterbalance valve on each cylinder
Overpressure
Rod relief on each cylinder; crush-limited relief
Controls
Dead-man lever at a remote stand; slip retainers
Work floor
Traveling work floor option
Cylinder hydro test
7,500 psi, each cylinder
Rev E design values
Design values. The jack is not rated or certified until a licensed PE has stamped the design and the unit has passed its proof test. Pull on any string is limited by the operating relief to 80% of pipe body yield (TPS-200: also limited by slip-crush capacity). The wellhead, a cellar bridge or bearing mats must carry the full reaction load.