A “fish” is anything left in the hole that shouldn’t be: a parted string, a stuck joint, a tool, or junk. Fishing is the work of getting it back out. Most fishing jobs go well when the crew knows exactly what is down there before the first tool goes in.
1. Describe the fish
Write it down before anything else:
- What it is: casing, tubing, rods, a tool, junk.
- Top of fish: depth, and what the top looks like (clean break, split, flared, a collar looking up).
- Size: OD, weight, grade and connection of the pipe, and the ID if a tool has to go inside it.
- Why it is stuck, if you know: cement, sand, scale, collapsed casing, a dropped object, a key seat.
If you don’t know what the top looks like, run an impression block and find out. It takes less rig time than guessing with the wrong catch tool.
2. Choose how to catch it
- Over the outside: an overshot fitted with a grapple sized to the fish’s OD.
- From the inside: a spear with a grapple sized to the fish’s ID.
- Fish that won’t come: wash over it to clear what is holding it, cut it shorter, or mill it up.
Use the drift figure from our casing table to make sure every tool passes through the casing above the fish.
3. Know your limits before you pull
The pipe above the fish, the fishing string and the catch tool all have pull limits. The weakest one sets the most you can pull. Leave margin: a jarring or pulling string that parts above the first fish makes a second fish.
A casing jack is useful when the pull needed is more than a small rig can give, or when you need slow, steady, measured pull on the fish. The jack’s gauge reads the load directly, so you see the moment the fish moves.
4. Catch, test, pull
- Engage the fish and take a small pull to confirm the catch before you pull hard.
- Bring the pull up in steps and record each one.
- If it doesn’t move at the planned limit, stop. Release, rethink, and change the method.
5. Recover and record
Lay the pipe that came out down in order and measure it. Compare what came out with what you expected. Write up the job: depths, tools, pulls and what the fish looked like. The next crew on this well will need it.
Every figure here comes from your own pipe records and the calculators on this site. Check them against the well file before you pull.